|
|
Rainguard offers a variety of 100% Green, Eco-Friendly concrete & masonry stain products to meet the specific needs of the customer. The COLOR-LOK stain program comes in two different levels of durabiliity; Siliconized Stains and Heavy Traffice Urethane Stains. Siliconized stains are great for low traffic horizontal areas or vertical substrates and can provide deocrative color and protection and water repellency. Heavy Traffic Urethane Stains are built tough for vehicular traffic, heavy pedestrian traffic or heavy weathering but still provide the same decorative colors. Both levels of durability are available as solid color stains or as semi-transparent stains. COLOR-LOK deep penetrating stains provide a rich uniform finish without changing the character or integrity of the visual look of concrete. Used in CSI Division 7, 9 specifications.
|
| |
| |
Semi-transparent Stain
|
Solid Color Stain
|
|
* For Vertical & Horizontal Surfaces
* Exclusive MICRO-LOK formulation
* Mold and Mildew Inhibitor
* Dries to a flat finish
* Solid Color or Semi-Transparent
* Breathable - does not trap moisture
* Most may be applied in cold temperatures
* Material, Labor Warranties up to 10 years
* Low V.O.C. and LEED compliant
* 100% free of known cancer substances
* Quick 2 hour recoat times
* Does not change look of surface texture
* Use on concrete, block, masonry, wood
|
|
|
|
|
COLOR-LOK Solid Color or Semi-Transparent Silicone Stains for Masonry are premium quality, modified acyrlic stain fortified with silicone for use on exterior and interior masonry surfaces. These deep penetrating stains provide a rich uniform finish without changing the character or integtrity of the concrete thus avoiding that "painted" look. COLOR-LOK combines permanent non-fading pigments with top quality tough, flexible resins. The addition of ultraviolet light absorbers, color stabilizers and penetrating agents ensure long lasting performance. This combination protects the surface while allowing moisture vapor to escape, preventing flaking and peeling.
|
|
Where will you find Color-Lok Silicone Acrylic Stain?
|
Aldar Properties HQ
|
Steven Speilberg's House
|
JP Getty Museum
|
|
|
|
|
* Meets Master Painters Institute (MPI) #58 - Stain, Interior Concrete Floors
* Low V.O.C. & LEED Compliant <45 g/L
* Available 5 and 10 year warranties when used in the appropriate system
* Use in a wide range of applications including commercial, industrial and residential vertical surfaces as well as horizontal surfaces not subject to heavy pedestrian or vehicular traffic
COLOR-LOK Solid Color and Semi-Transparent Heavy Traffic Urethane Stains for masonry are premium quality, modified acrylic stains fortified with urethane for use on exterior and interior masonry surfaces. These deep penetrating stains allow the natural character of the masonry surface to show through the coating while maintaining the depth and intensity of the color. COLOR-LOK combines permanent non-fading pigments with top quality, tough, flexible rsins. The addition of ultraviolet light absorbers, color stabilizers and penetrating agents ensure long lasting performance. This combination protecdts the surface while allowing moisture vapor to excape, preventing flaking and peeling. Single component urethane formulations also provide exterme durability against esxcessive wear caused by hevay vehicular or pdestrian traffic. There is no mixing required for these urethane products and you can reuse the remaining product left in a container for your next job as there is no POT life problem.
* Meets Master Painters Institute (MPI) #58 - Stain, Interior Concrete Floors
* Low V.O.C. & LEED Compliant <50 g/L
* Available 5 and 10 year warranties when used in the appropriate system
* Superior impact and abrasion resistant material
* Resits hot tire pick-up
* Non-yellowing formulation
* Can be used as stand alone horizontal coating or as a topcoat to multi-component system in areas like garages, factory and commercial floors subject to heavy vehicular traffic or retail environments subject to heavy pedestrian traffic
Rainguard TONER REDUCER is site mixed with COLOR-LOK Solid Color Silicone Stain to reduce opacity and create a semi-transparentstain that can be used on interior and exterior masonry, concrete, brick, stucco and other masonry surfaces. Mix ratios can be varied to create varying degrees of transparency depending on requirements. Offers the applicator in the field the opportunity to customize the look to customer preference.
COLOR-LOK
TECHNICAL INFORMATION
|
|
Technical
Data Sheet
|
MSDS
|
LEED
|
DIVISION
SPEC
|
|
Color-Lok Silicone Acrylic Solid Color
|
X
|
X
|
X
|
X
|
|
Color-Lok Silicone Acrylic Semi-transparent
|
X
|
X
|
X
|
X
|
|
Color-Lok Urethane Acrylic Solid Color
|
X
|
X
|
X
|
X
|
|
Color-Lok Urethane Acrylic Semi-transparent
|
X
|
X
|
X
|
X
|
|
Copyright 2010 Exterior Performance Coatings, Inc.
